Yealink SIP-T52S Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series/CP860/CP920 IP Phones
876
Parameters
Permitted
Values
Default
When Y=8, the default value is 102;
When Y=9, the default value is 105;
Example:
account.1.codec.1.rtpmap = 0
Note: It is only applicable to the IP phones running firmware version 81 or prior.
Web User Interface:
None
Phone User Interface:
None
The configuration of audio codecs via web user interface for old configuration behavior is the
same as the newer one. For more information, refer to the introduction in the section New
Configuration Behavior.
Packetization Time (PTime)
Ptime is a measurement of the duration (in milliseconds) of the audio data in each RTP packet
sent to the destination, and defines how much network bandwidth is used for the RTP stream
transfer. Before establishing a conversation, codec and ptime are negotiated through SIP
signaling. The valid values of ptime range from 10 to 60, in increments of 10 milliseconds. The
default ptime is 20ms. You can also disable the ptime negotiation.

Yealink SIP-T52S Specifications

General

Touchscreen	-
Display diagonal	2.8 \
Backlight display	Yes
Display resolution	320 x 240 pixels
Lines quantity	16 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	12
AC adapter input voltage	100 - 240 V
Bluetooth version	2.1+EDR
Security algorithms	802.1x RADIUS, HTTPS, MD5
Ethernet LAN interface type	Gigabit Ethernet
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.722, G.723, G.723.1, G.726, OPUS, iLBC
Volume control	Digital
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Front camera	No
Operating system installed	Linux

Weight and Dimensions

Depth	212 mm
Width	211.6 mm
Height	166.8 mm