YOKOGAWA wt3000 User Manual

9-20 IM 760301-01E
9.4 Saving the Screen Image Data
CAUTION
Do not remove the PC card or USB memory or turn OFF the power when the access
indicator or icon of the PC card or USB memory is blinking. This can damage the PC
card or USB memory or destroy the data on the it.
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL
USER SET
DISPLAY ITEM & ELEMENT
RESET SET
PAGE PAGE
SCALING
HRM SET MEASURE SYNC SOURCE
AVG LINE FILTER
FREQ
FILTER
FILE
PRINT
MISC
STORE IMAGE SAVE
HELP
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
To exit the menu during operation, press ESC located above
the soft keys.
In the procedural explanation below, the phrase “press the
cursor keys” may be used. This phrase refers to the
procedures for selecting items and entering values and
character strings. For details on the procedures, see section
3.14.
Cursor keys
1. Press SHIFT+IMAGE SAVE (MENU) to display the Image Save menu.
• Selecting the Data Format
2. Press the Format soft key to display the Format menu.
3. Press any soft key from TIFF, BMP, Post Script, PNG, and JPEG to select the
data format.
• Selecting the Color Mode
(Selectable only when the data format is set to TIFF, BMP, PNG, or JPEG in step 3)
4. Press the cursor keys to select Color, Reverse (white background), Gray
(grayscale), or OFF.
• Turning ON/OFF the Data Compression
(Selectable only when the data format is set to BMP in step 3 and the color mode is
set to Color, Reverse, or Gray in step 4.)
5. Press the Compression(Color) soft key to select ON or OFF.
For BMP

YOKOGAWA wt3000 Specifications

General

Brand	YOKOGAWA
Model	wt3000
Category	Measuring Instruments
Language	English