York Fitness T500 User Manual

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
*
*
YORK T500 TM / 22
MONITOR POWER SUPPLY
The training computer does not require any battery since it is supplied with power via the
running treadmill.
TROUBLE SHOOTING
WHEN TO CALL FOR HELP
This treadmill is designed with user safety as the number one priority. In the event of an electrical
failure, the treadmill will shut off automatically to prevent user injury and to prevent damage to
expensive components such as the motor.
TROUBLE SHOOTING GUIDE
Problem Potential Cause Corrections
Treadmill will not start 1. Not plugged in 1. Plug into grounded outlet.
2. Safety key not inserted 2. Insert the safety key into the console.
3. House circuit breaker tripped 3. Reset or replace fuse.
4. Treadmill circuit breaker tripped 4. Reset the circuit breaker.
If happens again, lubricate the deck to
reduce friction between mat and deck.
5. On/Off switch on "OFF" 5. Turn On/Off switch to "ON".
Running mat slips 1. Running mat not tight enough 1. Adjust running mat tension.
2. Drive belt not tight enough 2. Adjust drive belt tension.
Running mat hesitates 1. Insufficient lubrication 1. Apply silicone lubricant.
when stepped on 2. Running mat too tight / too loose 2. Adjust running mat tension.
Running mat is off center Running mat tension uneven Center the running mat.
across the rear roller
Error 2: ( E2 ) Motor Connection Error
Call your dealer for advice.
Error 3: ( E3 ) Speed Sensor Error
Call your dealer for advice.
Error 4: ( E4 ) Relay Error
Call your dealer for advice.
When you encounter unusual behaviour from the treadmill, simply turn the power switch off and on
to reset the treadmill.
This should clear incidental errors and prepare the treadmill for normal operation again.
If, after you have reset the treadmill by turning the power switch off and on again, the treadmill is
still not operational, then it is time to call your dealer for advice.
Error 1: ( E1 ) Communication Error
When the connection cables are not installed correctly, the monitor will display “E1” on
display screen.
Please examine whether all connection cables are well connected and then reset the
treadmill again.
If the treadmill returns to normal operation, you may continue to use the treadmill.
If the treadmill does not return to normal operation, then call the dealer for advice.
Error 7: ( E7 ) Safety Key Error
Simply secure the safety key in place and then try again.

York Fitness T500 Specifications

General

Brand	York Fitness
Model	T500
Category	Treadmill
Language	English