Note: Max VFR in WDR mode will be different comparing to normal mode. Refer to 2.3
Video - Variable Frame Rate (VFR).
3.4. Timelapse Video Recording
With Timelapse function, the camera can record time-lapse video with steps are as
follows:
1) Set Video - Variable Framerate to "off", otherwise it is not able to enable Timelapse
setting.
2) In Video - Timelapse setting, set the Timelapse interval value (the interval is the time
between each frame shot) through the FN key (skip to the next setting item), and UP/
DOWN button, then select “OK” to confirm it.
The minimum unit of interval time is milliseconds (0.1s), and the range can be set as
0.2s ~ 60s.
3) After the timelapse interval is confirmed, the value will show in the item Timelapse,
and the camera icon will change to timelpase recording mode on the standby screen.
4) Set other required video parameters, except the Variable Framerate can not be
opened, the rest is the same as normal recording video.