Technical Specifications
162
2D Imager SE2100 imager (1D and 2D).
SE4710 imager (1D and 2D).
Camera Rear - 8 MP autofocus; f/2.4 aperture; rear camera flash LED generates
balancedwhite light; supports Torch mode. (Available only on TC20 with
WSE4710 scan engine).
2D Imager Engine (SE2100) Specifications
Field of View Horizontal - 41.5°
Vertical - 31.7°
Image Resolution 640 horizontal X 480 vertical pixels
Roll 360°
Pitch Angle ± 60° from normal
Skew Tolerance ± 60° from normal
Ambient Light Sunlight: 10,000 ft. candles (107,639 lux)
Focal Distance From front of engine: 10.7 cm (4.2 in.)
Illumination System LED: Ultra white
Pattern Angle: 42° horizontal, 32.0° vertical at 50% intensity
2D Imager Engine (SE4710) Specifications
Field of View Horizontal - 42.0°
Vertical - 28°
Image Resolution 1280 horizontal X 800 vertical pixels
Roll 360°
Pitch Angle ± 60° from normal
Skew Tolerance ± 60° from normal
Ambient Light Sunlight: 10,000 ft. candles (107,639 lux)
Focal Distance From front of engine: 19.4 cm (7.64 in.)
Laser Aiming Element LED: 610
Aiming Dot Brightness Level: 130 fcd nominal
Illumination System LEDs: Hyper Red 660 nm
Pattern Angle: 53° horizontal, 32° vertical at 50% intensity
Table 12 Data Capture Supported Symbologies
Item Description
1D barcodes Code 39, Code 128, Code 93, Codabar, MSI, UPC/EAN, Interleaved 2 of
5, RSS
2D barcodes PDF-417, Micro PDF-417, Composite, TLC-39, Datamatrix, QR Code,
Micro QRCode, Maxicode, Postal codes, Aztec Code, Han Xin
Table 11 TC20 Technical Specifications (Continued)
Item Description
To Next Page
Loading...
Need help?
General
