To Next Page

To Previous Page

13 | P a g e

6.8 Switching ON or OFF

Press button to turn the unit ON. The LED display on the control panel will turn on and

the interior temperature will be displayed. Press the button for 3 seconds to switch the

unit OFF. The system has a memory which records your last setting before shut down. If the

power supply is cut off or disconnected, the unit will switch off automatically and once the

power supply is restored it will automatically switch back on.

6.9 Setting the target fridge temperature

To set the target cabinet temperature of your ARB Fridge Freezer:

 Turn the fridge freezer ON .

 Press button once to display current cabinet target temperature. For Dual Zone fridges,

press once for the first zone, and press again for the second zone.

 Press button to increase the target temperature by one degree.

 Press button to decrease the target temperature by one degree.

 Continue pressing or until the desired target cabinet temperature is reached.

 After 5 to 6 seconds of inactivity, the target temperature will be set and the display will show

the current cabinet temperature.

NOTE - When the target temperature is reached, the compressor will stop running.

6.10 Changing between °C and °F

Your ARB Fridge Freezer is capable of displaying temperature in either degrees Celsius (°C) or

degrees Fahrenheit (°F.)

To change the display between °C and °F:

 Turn the fridge freezer ON.

 Press twice (three times for Dual Zone) to display current temperature unit setting.

 Press or to change between °C and °F.

 After 5 to 6 seconds of inactivity, the temperature units will be set and the display will show

the current cabinet temperature.

NOTE – Changing between °C and °F will NOT convert the target temperature to the new

units °C or °F. Instead, the fridge/freezer will use the previously stored target temperature

setting for the temperature units °C and °F.

Zero ARB User Manual

Other manuals for Zero ARB