Zero ARB User Manual

16 | P a g e
6.14 Bluetooth communication setting
The Bluetooth communication of your ARB fridge freezer can be switched ON or OFF.
When switched OFF, the fridge will not communicate with the smart phone APP.
To change the Bluetooth communication setting:
 Turn the fridge freezer ON.
 Press four times (five times for Dual Zone) to display current Bluetooth
setting.
 Press or to change the Bluetooth communication setting between
ON and OFF.
 After 5 to 6 seconds of inactivity, the Bluetooth communication setting will be set
and the display will show the current cabinet temperature.
6.15 Bluetooth connection setting
The Bluetooth connection setting can be changed to Open or Closed.
When set to Open (OPE), the phone APP will connect by scanning the QR barcode or
connect directly using the phone APP. In the latter case, the ARB Fridge Freezer will be
listed as an available device in the phone APP. The name of the device will be “ARB
ZERO XXXX” where XXXX is the last 4 digits of the QR barcode.
When set to Closed (CLO), the phone APP will only connect to the ARB Fridge Freezer
by scanning the QR barcode. The QR barcode is located on the rear of the fridge. In
this case, the ARB Fridge Freezer will not be listed as an available device in the phone
APP.
To change the Bluetooth connection setting:
 Turn the fridge freezer ON.
 Press , then and hold both buttons at the same time for 3 seconds to
enter the Bluetooth connection setting.
 Press or to change the Bluetooth connection setting between Open
(OPE) and Closed (CLO).
 After 5 to 6 seconds of inactivity, the Bluetooth connection setting will be set and
the display will show the current cabinet temperature.

Zero ARB Specifications

General

Brand	Zero
Model	ARB
Category	Freezer
Language	English