Zhiyun Crane Plus User Manual

13 zhiyun-tech.com 14zhiyun-tech.com
Start Up
Balance Adjustment
Level Adjustment on Pan Axis Control Panel Introduction
3
2
Loosen Thumb Screw
❸
. Adjust the Pan Axis until the camera can stay still while keeping
the Vertical Arm
2
level when turned to the right/left side. Complete balance adjustment by
tightening up Thumb Screw
❸
.
Battery Level Indicator
Shines YELLOW light when the stabilizer is
Powered on/off:
Quick flash for 3 sec. and shines solid for 1 sec.
when powered on. Quick flash for 3 sec. when
powered off.
Shines BLUE light when the stabilizer is in normal
operation, the flashing frequency of the BLUE
light indicates the current battery level:
Quick flash 4 times for battery level of 75%-100%.
Quick flash 3 times for battery level of 50%-75%.
Quick flash 2 times for battery level of 25%-50%.
Quick flash 1 time for battery level of 0%-25%.
Shifter Lever Operation
In the event when a SONY camera is connected:
Push the Shifter Lever in T direction to zoom out,
and in W direction to zoom in.
In the event when a Panasonic camera is
connected: Move the Shifter Lever to either
direction for focusing.
Micro USB Port
Connects the stabilizer to a computer through a
Micro USB cable for on-line
Mode Button
Press for 1 second to enter or exit standby
mode.
Single press to switch between pan-following
and lock mode.
Quick double press to enter the following mode.
Quick triple press to enter the selfie mode
(180° rotation on pan axis)
Power ON/OFF
Power on the stabilizer by pressing the Power
button for about 3 sec.
After the stabilizer is powered on, the Power
button can be used for camera shooting control
(only after the camera is connected to the
stabilizer).
Single press the button to take photos.
Double press the button to start video recording.
Double press the button again to stop recording.
Joystick Operation
Joystick controls the camera movement by
turning the 3 axes up/down or left/right.
Joystick
Mode Button
Battery Level
Indicator
Power ON/OFF
Shifter Lever

Zhiyun Crane Plus Specifications

General

Type	Hand camera stabilizer
Material	Aluminium, Polyblend
Motorized	Yes
Motor type	Brushless motor
Product color	Black
Tilt angle range	0 - 360 °
Angle of rotation	360 °
Maximum weight capacity	2.5 kg
Charging time	3 h
Operating time	18 h
Battery voltage	3.7 V
Battery capacity	3600 mAh
Operating temperature (T-T)	-10 - 45 °C
Package depth	355 mm
Package width	310 mm
Package height	103 mm
Package weight	2800 g
Cables included	USB

Weight and Dimensions

Depth	188 mm
Width	173 mm
Height	374 mm
Weight	950 g