Zhiyun Crane Plus User Manual

9 zhiyun-tech.com 10zhiyun-tech.com
Camera Installation
Camera Installation
Operation Method
Top Down Mode Bottom Up Mode
Gimbal balance shall be properly adjusted before accessing Bottom Up mode. Do not rotate the
handle while turning it straight up/down to switch between Top Down and Bottom Up mode.
Note: The size of the camera and its balance condition when mounted may affect the successful
access to Bottom Up mode. For certain camera models, balance should be adjusted after
access to Bottom Up mode.
When the motor arm is pulled to an extreme extent in case of big lens mounting, Bottom Up
Holding Gesture may not be supported.
1
1
2
2
3
4
Mount the camera in parallel with the mounting plate, match the 1/4" Threaded Hole at the
bottom of the camera with the empty slot of the mounting plate. Move the camera as close
as possible to the Tilt Motor, and tighten the Camera Mounting Screw
❹
to fix the camera
positionTilt Motor, and tighten the Camera Mounting Screw
❹
to fix the camera position.
Do not power on the stabilizer before the camera is properly mounted.

Zhiyun Crane Plus Specifications

General

Type	Hand camera stabilizer
Material	Aluminium, Polyblend
Motorized	Yes
Motor type	Brushless motor
Product color	Black
Tilt angle range	0 - 360 °
Angle of rotation	360 °
Maximum weight capacity	2.5 kg
Charging time	3 h
Operating time	18 h
Battery voltage	3.7 V
Battery capacity	3600 mAh
Operating temperature (T-T)	-10 - 45 °C
Package depth	355 mm
Package width	310 mm
Package height	103 mm
Package weight	2800 g
Cables included	USB

Weight and Dimensions

Depth	188 mm
Width	173 mm
Height	374 mm
Weight	950 g