Name: Zhiyun Crane Plus
Brand: Zhiyun
Rating: 5 (1 reviews)

To Next Page

To Previous Page

27 zhiyun-tech.com 28zhiyun-tech.com

Operation guide on motor torque adjustment

Product Specifications

Min Standard Max Remarks

Input Voltage 6.8V 8.4V 12.6V

Operation Current 80mA 110mA 6000mA

Operation

Temperature

-10° C 25° C 45° C

Operation Time 12h 18h

Tested under static operation

after proper balancing

Charging Time 3h

Weight 950g Excluding batteries

Tilt Mechanical Range 360° Unlimited rotation

Roll Mechanical Range 360° Unlimited rotation

Pan Mechanical Range 360° Unlimited rotation

Payload 350g 2500g

Crane Plus Firmware V1.52 and above supports parameter setting for motor force. Users can set the

motor force to adapt to cameras with different weights via the calibration upgrade tool or the app.

Setting process

Adjustment method 1 :The motor force of the stabilizer needs to be adjusted (3 levels) to adapt

the stabilizer to cameras and lens of different weight for ideal use. Please refer to the connection

way on the APP introduction, firstly connect the Crane by ZY PLAY, then choose the suitable

strength to set up the motor force in ZY PLAY correctly.

Adjustment method 2 :

1. Download the calibration upgrade tool and USB driver from Zhiyun official website. Double

click to install USB driver.

2. Connected gimbal and PC by USB cable, double-click Tool to run Tool. Power on gimbal, press

and hold Mode button for seconds, gimbal enter to standby mode.

3. Click “Setting” to enter to parameter setting page. Click “Open”, Users can set motor

power in Other Module.

4. Motor power have low, medium and high three options.

Low: Default setting ( recommend : Crane Plus + Sony A7S or below weight)

Medium:Moderatesetting(recommend:CranePlus+SonyA7S）

High:Maximumsetting(recommend:CranePlus+Canon5D）

Questions and Answers:

Need help?

Do you have a question about the Zhiyun Crane Plus and is the answer not in the manual?

Zhiyun Crane Plus Specifications

General