Zip'r Breeze 3 User Manual

20
TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter,
including the speed adjustment dial, throttle control levers, battery condition
meter, running lights switch, hazard light switch, turn signal buttons, status LED,
and horn buttons. See figure 6 and 6a.
WARNING! Do not expose the tiller console to moisture. In the event that
the tiller console does become exposed to moisture, do not attempt to
operate your scooter until the tiller console has dried thoroughly.
Running Light Switch
Key Switch
Battery Condition Meter
Speed Adjustment Dial
Horn Button
Turn Signal Button
Hazard Light Switch
Throttle Control Lever (Reverse)
Throttle Control Lever (Forward)
5-AMP Fuse
Tiller Release Lever
FIGURE 6 & 6A. TILLER CONSOLE
Key Switch
 Insert the key into the key switch and turn it clockwise to turn on
your scooter.
 Turn the key counterclockwise to turn off your scooter.
WARNING! If the key is moved to the off position while your Zipr Breeze is
in motion, the electric brakes engage and your scooter will come to an
abrupt stop!
YOUR ZIPR BREEZE


Zip'r Breeze 3 Specifications

General

Brand	Zip'r
Model	Breeze 3
Category	Scooter
Language	English