29
BEFORE GETTING ONTO YOUR SCOOTER
Have you fully charged the batteries?
Is the manual freewheel lever in the drive (up) position? Never leave the
manual freewheel lever pushed down unless you are manually pushing
your scooter.
WARNING! Never attempt to get onto or off of your scooter without first
removing the key from the key switch. This prevents the scooter from
moving if accidental throttle control lever contact is made.
GETTING ONTO YOUR SCOOTER
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your scooter.
3. Pull up on the seat lock lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Pull up on the seat lock lever and rotate the seat until you are facing
forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
Is the seat at the proper height? See the “Comfort Adjustments” section of
this manual.
Is the tiller handle at a comfortable setting and locked securely in place?
See the “Comfort Adjustments” section of this manual.
Is the key inserted in the key switch and in the on position?
Does the scooter’s horn work properly?
Is your proposed path clear of people, pets, and obstacles?
Have you planned your route to avoid adverse terrain and as many
inclines as possible?
OPERATING YOUR SCOOTER
After planning your route:
Set the speed adjustment dial to your desired speed.
Press your thumb against the appropriate throttle control lever.
The electromechanical disc brake automatically disengages and the
scooter accelerates smoothly to the speed you preselected with the speed
adjustment dial.
Pull on the left handgrip to steer your scooter to the left. Pull on the right
handgrip to steer your scooter to the right.
Move the tiller to the center position to drive straight ahead.
OPERATIONS
To Next Page
Loading...
Need help?
General
