31
WARNING! Remove the key from the key switch before adjusting the tiller
or the seat. Never attempt to adjust the tiller or the seat while the scooter
is in motion.
TILLER ANGLE ADJUSTMENT
Your scooter is equipped with a pivoting tiller that
allows adjustment to several positions from the
scooter deck to the furthest forward stop.
1. Lift the tiller adjustment lever. (Figure 10)
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure
the tiller in position.
Lowering The Tiller To The Scooter Deck
NOTE: In order to lower the tiller to the scooter
deck, you must first remove the seat and batteries.
See the “Disassembly & Assembly” section of this
manual.
CAUTION! Do not attempt to forcefully lower
the tiller if its not in the proper lowering position.
Excessive force can possibly damage the tiller
adjusting mechanism.
1. Turn the scooter tiller to the right so the tiller,
when lowered, will be to the left of the seat
post. (Figure 10A).
2. Pull up on the tiller adjustment lever and
lower the tiller slowly toward the scooter
deck. (Figure 10B).
NOTE: When the tiller is past the last locking stop,
you can release the tiller adjustment lever. The
tiller will not stop again until it reaches it’s lowest
point.
FIGURE 10.
TILLER
ADJUSTMENT
FIGURE 10A.
LOWER THE
TILLER
FIGURE 10B.
LOWEST
TILLER
POSITION
COMFORT
To Next Page
Loading...
Need help?
General
