Zip'r Breeze 3 User Manual

38
What if my scooter does not move when I press the throttle control levers?
 With the key turned to the on position, check the status LED. If the LED
flashes three times, a pause, then flashes two times, this is the manual
freewheel lever code and means your scooter is in freewheel mode.
 When the manual freewheel lever is pushed down, the brakes are
disengaged and all power to the transaxle is cut.
 Pull up on the manual freewheel lever, turn the scooter off, and then turn
the scooter on, to return to normal scooter operation.
What if the main circuit breaker repeatedly trips?
 Charge the scooter’s batteries more frequently.
 If the problem continues, have both of your scooter’s batteries load tested
by an authorized Zipr provider.
 You may also perform the load test yourself. Battery load testers are
available at most automotive parts stores.
 Follow the directions supplied wit the load tester.
What if the battery condition meter dips way down and the motor surges or
hesitates when I press my scooter’s throttle control lever?
 Fully charge your scooter’s batteries.
 Have a load test conducted on the batteries individually.
If you experience any problems with you are unable to solve, immediately contact
your authorized Zipr provider for information, maintenance, and service. You can
also contact Zipr directly at (800) 760-9107.
TROUBLESHOOTING CONTINUED

Zip'r Breeze 3 Specifications

General

Brand	Zip'r
Model	Breeze 3
Category	Scooter
Language	English