21
®
[Version] Display device name, system version, video/audio channel number,
sensor/alarm input/output, local storage.
[Time Setting Switch] Enable this switch to manually set the system date and
time; disable this switch then the system date and time will be synchronized with
local PC only to check the status and can't be congured to disable this switch.
After setting all parameters, click the [Sync time] button, the setting will take effect
immediately.
4.2.5 Advanced setting
·User management
Figure 4-17 User management interface
Each IP camera can be set up to have up to 15 users. Admin is the system
default super user and cannot be deleted, but the admin password can be
changed. User's authority is as following:
Super-User authority: operate and set all the function and parameter of IP camera
Common user authority: The common user is allowed to view video, adjust their
password and delete their own account. Common users are not granted any
additional authorities.
Note: the default user after leaving factory is admin, the password is 111111.
Both user names and passwords are case sensitive.
To Next Page
Loading...
Need help?
General
