14
Call Waiting
You will hear two tones if someone calls while you are already on a call.
To hold the current call and accept the waiting call, press the Flash (or Phone/Talk) key. You can press
the Flash (or Phone/Talk) key anytime to switch back and forth between calls.
To clear the current call and accept the waiting call, enter "1" and press the Flash (or Phone/Talk) key.
To reject (User Busy) the waiting call, enter "0" and press the Flash (or Phone/Talk) key.
Notes:
Your MF279T comes with standard three-way calling and call waiting. Operation of these features will
vary depending on your home phone equipment.
If your phone does not have a Flash (or Phone/Talk) key, then use the off-hook mechanism
supported by your phone.
Call Forwarding
Always forward
1. Press *21* on your connected phone.
2. Dial the 10-digit number to which you wish to forward your calls.
3. Press the “#” key.
(Example: *21*1234567890# forwards your calls to the phone number 123-456-7890)
4. Wait for 3 seconds until you hear a confirmation tone for the forwarding process to complete before
hanging up.
Note: To un-forward calls, press #21#, wait for 3 seconds until you hear a confirmation tone for the
un-forwarding process to complete before hanging up.
Forward when busy
1. Press *67* on your connected phone.
2. Dial the 10-digit number to which you wish to forward your calls.
3. Press the “#” key.
4. Wait for 3 seconds until you hear a confirmation tone for the forwarding process to complete before
hanging up.
Note: Press #67# to un-forward calls.
To Next Page
Loading...
Need help?
General
