13
Note: If you change the operation mode, the device will be restarted automatically.
3. Set the detail parameters for the operation mode.
4. Begin to enjoy your Internet service.
Using Your Device
Calling
Making Calls
Using a phone connected to your MF279T, place and receive calls as you normally would. The MF279T
supports both cordless and corded phone dialing methods.
Note: Make sure to dial the 10-digit phone number, including area code.
Three-Way Calling
While on an existing call, press the Flash (or Phone/Talk) key on your phone to put the first party on hold.
When you hear a dial tone, dial the second party's number (wait up to four [4] seconds). When the
second party answers, press the Flash (or Phone/Talk) key again to complete the three-way connection.
If the second party does not answer, press the Flash (or Phone/Talk) key to end the connection and
return to the first party.
Note: If your phone does not have a Flash (or Phone/Talk) key, use the off-hook mechanism supported
by your phone instead.
To Next Page
Loading...
Need help?
General
