25
MAC-IP Bind Switch: Select "Enable" to bind IP Address and MAC Address on your device.
MAC Address: The MAC Address is a network identifier. This read-only field displays the MAC Address
for the Wi-Fi interface on this device.
IP Address: The IP address for this device, as seen from the local network. This is set to a default value.
Current Bind List: Lists any MAC-IP Bind you have bound.
Firewall
A firewall protects your connected devices against malicious incoming traffic from the Internet. The
firewall cannot be disabled, but the following settings are available.
MAC/IP/Port Filtering
You can Enable or Disable the MAC/IP/Port Filtering feature as needed to block certain Internet traffic. If
this setting is enabled, you can then choose whether traffic is Accepted or Dropped by default by
selecting the appropriate option from the Default Policy dropdown.
Default Policy:
Accepted: Internet traffic is allowed by default. Only traffic from the selected applications will be
blocked from accessing the Internet. Traffic is identified by port numbers. Some applications are
pre-defined. You can define additional applications by clicking the "Add Custom Application" button,
but you need to know details of the traffic used and generated by the applications you wish to define.
In particular, you need to know the port numbers and the protocol (TCP, UDP) used by outgoing
traffic.
Dropped: Internet traffic is blocked by default. Only traffic from the selected pre-defined or custom
applications are allowed to access the Internet.
Applications: Use these check boxes to deny or allow access to the Internet for each application, as an
exception to the selected Default Policy of accepting or dropping Internet traffic.
To start, click the Apply, then provide the following data:
To Next Page
Loading...
Need help?
General
