10
gateway will broadcast the SSID, and other devices can detect and connect
to it.
4. Set Security Configuration as shown in the following figure:
Encryption will keep your traffic from being monitored and accessed without
authorization. Select an encryption mode from the list, and then set a
password for it.
5. The configuration will look as shown in the following figure:
Make sure that all the parameters shown in the figure are correct, and then
click Apply.
Network Settings
Data Roaming
Select Network Settings > Data Roaming. You can connect to internet in
the roaming status. Check the box and then click Apply.
To Next Page
Loading...
Need help?
General
