Zte ZXR10 2910E-PS User Manual

ZXR102900ESeriesCongurationGuide
TheM_buttonfunctionincludesthefollowingmodes:
1.LINKmode(LINK):Inthismode,aportindicatordisplaystheLINK/ACTstatusofa
port.Iftheportisinlinkstatus,thegreenindicatorislit.Ifthereistrafc,thegreen
indicatorisashing.Iftheportisnotinlinkstatus,theindicatorisnotlit.
2.SPDmode(SPD):Inthismode,aportindicatordisplaysthecurrentspeedofaport.
Iftheportspeedisthesameasthedefaultportspeed,thegreenindicatorislit.Ifnot,
theyellowindicatorislit.
3.DUPLEXmode(DUP):Inthismode,aportindicatordisplaystheduplexstatus.Ifthe
portisinfull-duplexmode,thegreenindicatorislit.Iftheportisinhalf-duplexmode,
theyellowindicatorislit.
4.STAmode(STAT):Inthismode,aportindicatordisplaystheSTPstatus.IftheSTP
statusoftheportisForward,thegreenindicatorislit.IftheSTPstatusoftheportis
Disable,theindicatorisnotlit.Inotherstatuses,theyellowindicatorislit.TheSTA
statusisthestatusoftheportinInstance0.
5.CPUusagemode(CUP%):Inthismode,aportindicatordisplaysthecurrentCPU
usage.Forthe2910E-PS,therst8portsdisplaythecurrentusage,eachofwhich
represents12.5%.Forotherdevices,therst10portsdisplaythecurrentusage,each
ofwhichrepresents10%.
6.Memoryusagemode(MEM%):Inthismode,aportindicatordisplaysthecurrent
memoryusage.Forthe2910E-PS,therst8portsdisplaythecurrentusage,each
ofwhichrepresents12.5%.Forotherdevices,therst10portsdisplaythecurrent
usage,eachofwhichrepresents10%.
7.Uplinkportoutboundbandwidthoccupationratemode(↑BW%):Inthismode,aport
indicatordisplaysthecurrentoccupationrateofuplinkportoutboundbandwidth.The
currentspeedontheuplinkinterfaceisusedasthebase.Forthe2910E-PS,therst
8portsdisplaythecurrentoccupationrate,eachofwhichrepresents12.5%.Forother
devices,therst10portsdisplaythecurrentoccupationrate,eachofwhichrepresents
10%.
8.Uplinkportinboundbandwidthoccupationratemode(↓BW%):Inthismode,aport
indicatordisplaysthecurrentoccupationrateofuplinkportinboundbandwidth.The
currentspeedontheuplinkinterfaceisusedasthebase.Forthe2910E-PS,therst
8portsdisplaythecurrentoccupationrate,eachofwhichrepresents12.5%.Forother
devices,therst10portsdisplaythecurrentoccupationrate,eachofwhichrepresents
10%.
9.PINGnetworkmanagementcentermode(PING):Inthismode,usetherstveport
indicators.Adevicesends5ICMPpacketstothenetworkmanagementcenter.Foran
ICMPpacket,ifthecorrectreplyisreceived,thecorrespondingindicatorturnsgreen.
Ifthecorrectreplyisnotreceived,thecorrespondingindicatorturnsyellow.Whenthe
veindicatorsarealllit,andthentheyarenotlit.After20seconds,thenextPINGow
willstart.Ifthenetworkmanagementaddressisnotcongured,theveindicatorsturn
yellowatthesametimeandthentheyarenotlit.After20seconds,thenextPINGow
willstart.
5-44
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2910E-PS Specifications

General

Model	ZXR10 2910E-PS
Category	Switch
PoE	Yes
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 2
MAC Address Table	8K
VLANs	4K
MTBF	> 100, 000 hours
Dimensions (W x D x H)	440 x 220 x 44 mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Jumbo Frame	9K bytes
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)