Zte ZXR10 2910E-PS User Manual

ZXR102900ESeriesCongurationGuide
CommandFunction
zte(cfg)#setTelnetserver{enable|disable}
Enables/disablestheT elnetserver
function,whichisenabledbydefault.
showTelnet(forallcongurationmodes)
DisplaystheT elnetcongurationand
status.
TelnetCongurationInstance
lCongurationDescription
SeeFigure5-39,aswitchhasalayer-3portwiththeIPaddress192.168.1.1/24,and
thehostIPaddressis192.168.1.100/24.Thehostremotelylogsintotheswitch
throughTelnet.
Figure5-39TelnetLoginInstance
lCongurationProcedure
1.Conguretheswitch
Bydefault,theT elnetserverfunctionisenabled.Youcanusethefollowing
commandtomakesurethatthefunctionisenabled.
zte(cfg)#showTelnet
Telnetserverisenable
2.CongurethePC
Note:
Windows2000providestheTelnetclientandserverprograms.Telnet.exe
istheclientprogramandtlntsvr.exeistheserverprogram.Inaddition,
Windows2000providestheT elnetservermanagementprogramtlntadmn.exe.
Bydefault,theTelnetserviceisinstalledinWindows2000.
5-46
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2910E-PS Specifications

General

Model	ZXR10 2910E-PS
Category	Switch
PoE	Yes
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 2
MAC Address Table	8K
VLANs	4K
MTBF	> 100, 000 hours
Dimensions (W x D x H)	440 x 220 x 44 mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Jumbo Frame	9K bytes
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)