Zte ZXR10 2910E-PS User Manual

Chapter2UsageandOperation
zte>?
enableenableconfiguremode
exitexitfromusermode
helpdescriptionoftheinteractivehelpsystem
showshowconfiginformation
listprintcommandlist
zte>
2.Enteraquestionmarkbehindacharacterorstring,commandsoralistofkeywords
startingwiththecharacterorstringcanbedisplayed.Notethatthereisnospace
betweenthecharacter(string)andthequestionmark.Forexample:
zte(cfg)#c?
cfmclearconfigcpu-thresholdcreateconfigclearcreate
zte(cfg)#c
3.Enteraquestionmarkbehindacommand,akeywordoraparameter,thenextkeyword
orparametertobeinputwillbelisted,andalsoabriefexplanationwillbegiven.Note
thataspacemustbeenteredbeforethequestionmark.Forexample:
zte(cfg)#config?
egress-aclenteregressaclconfigmode
groupentergroupmanagementconfigmode
ingress-aclenteringressaclconfigmode
mac-based-vlanentermac-basedvlanconfigmode
nasenternasconfigmode
routerenterrouterconfigmode
snmpenterSNMPconfigmode
tffsenterfilesystemconfigmode
4.Ifyouenterawrongcommand,keyword,orparameterandpressEnter,themessage
“Commandnotfound”willbedisplayedontheinterface.Forexample:
zte(cfg)#confter
%Commandnotfound(0x40000034)
Inthefollowingexample,theonlinehelpisusedtohelpcreateausername.
zte(cfg)#cre?
zte(cfg)#create?
aclcreatedescriptivenameforacl
cfmcreateCFMinformation
portcreatedescriptivenameforport
protocol-protectcreatearuleforprotocolprotect
usercreateauser
vlancreatedescriptivenameforvlan
zte(cfg)#createuser
%Parameternotenough(0x4000003f)
zte(cfg)#createuser?
<string>
username(maxsize:15)
zte(cfg)#createuserhouyx?
2-13
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2910E-PS Specifications

General

Model	ZXR10 2910E-PS
Category	Switch
PoE	Yes
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 2
MAC Address Table	8K
VLANs	4K
MTBF	> 100, 000 hours
Dimensions (W x D x H)	440 x 220 x 44 mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Jumbo Frame	9K bytes
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)