Zte ZXR10 2910E-PS User Manual

ZXR102900ESeriesCongurationGuide
[ZXR10Boot]
3.EntercintheZX10BootstatusandpressEntertoentertheparametermodication
status.SettheIPaddressesoftheEthernetportandtheTFTPserver.Thetwo
addressesaresettobeinthesamenetworksegment.
[ZXR10Boot]:c
bootlocation[0:Net,1:Flash]:
0/*startbytftporflash*/
actport:1
/*selectthepanelportthattftpenables*/
serverip:10.40.89.78
/*ftp/tftpserveraddress*/
netmask:255.255.255.0
/*subnetmask*/
ipaddr:10.40.89.79
/*localinterfaceaddress*/
bootfile:/img/zImage
/*versionfilelocation*/
username:ZXR10
/*theusernamewhenthefileisdownloadedbyftp*/
password:ZXR10
/*thepasswordwhenthefileisdownloadedbyftp*/
MAC:00:d0:d0:30:20:10
/*SwitchMACaddress*/
4.SettheIPaddressoftheback-endhosttobethesameasthatoftheaboveTFTP
server.
5.StarttheTFTPserversoftwareontheback-endserverandconguretheTFTPby
referringtotheTFTPconguration.
6.IntheZX10Bootstatus,enterzte,entertheBootManagerstatusoftheswitch.Enter
?todisplaythecommandlistforthisstate.
[ZXR10Boot]:zte
[bootManager]:?
?-aliasfor'help'
cd-changecurrentpath
exit-exitfrombootManagermode
format-formatflash
ftp-get/putfilefrom/toFTPserver
help-printonlinehelp
l-loadzImage
ls-listfilesincurrentdirectory
mv-change[source]nameto[destination]name
reboot-performREBOOToftheCPU
rm-removefile
setBOOTpassword-setpasswordforBOOTmode
setPtype-setpackagedtype
show-showboardinformation
3-14
SJ-20120409144109-002|2012-07-02(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2910E-PS Specifications

General

Model	ZXR10 2910E-PS
Category	Switch
PoE	Yes
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 2
MAC Address Table	8K
VLANs	4K
MTBF	> 100, 000 hours
Dimensions (W x D x H)	440 x 220 x 44 mm
Weight	3.5 kg
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Jumbo Frame	9K bytes
Power Supply	AC 100-240V, 50/60Hz
Operating Humidity	10% to 90% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)