ZXV10 W300 Wireless ADSL Router User's Manual
Log on to the device using the username “admin”. Click the
Advanced button on the web page to enter the Advanced ->
UpnP page, as shown in
FIGURE 14.
FIGURE 14 Advanced->UPnP
Click UpnP on the left side of the page to enter the UPnP
configuration page. In this page, enable or disable the UPnP
function and specify the UPnP WAN and LAN connections.
To enable this function, check the Enable UPnP check box.
4.6.2 DMZ
When the device operates in Routing mode, if you try to
access a service on a host placed in the intranet from an
external network, the DMZ host function should be enabled.
To configure this function:
To Next Page
Loading...
Need help?
General
