ABOUT THIS GUIDE
This guide provides all the information you need to install and use a
SuperStack
®
3 Switch 4200 in its default state.
This guide is intended for use with the following Switch 4200 Family
models:
■ Switch 4226T (3C17300) — 24 10BASE-T/100BASE-TX ports,
2
10/100/1000BASE-T ports
■ Switch 4250T (3C17302) — 48 10BASE-T/100BASE-TX ports,
2
10/100/1000BASE-T ports
■ Switch 4228G (3C17304) — 24 10BASE-T/100BASE-TX ports,
2
10/100/1000BASE-T ports and 2 GBIC ports
All procedures described in this guide apply to all models except where
stated.
For details on the Switch 4200 26-Port (3C17300A), Switch 4200 50-Port
(3C17302A) and Switch 4200 28-Port (3C17304A), refer to the following
document:
■ SuperStack 3 Switch 4200 Family Getting Started Guide (part number
DUA1730-0AAA03)
available for download from the 3Com Web site, www.3Com.com.
The guide is intended for use by network administrators who are
responsible for installing and setting up network equipment;
consequently, it assumes a basic working knowledge of LANs (Local Area
Networks).
If the information in the release notes that are shipped with your product
differ from the information in this guide, follow the instructions in the
release notes.
DUA1730-0AAA04.book Page 7 Thursday, November 17, 2005 2:59 PM
To Next Page
Loading...
Need help?
General