3BSE 027 941 R301 11
About This Book
General
This book describes the hardware platform AC 800M, together with the controllers
and associated units that are used in the AC 800M Controller. It also describes in
detail how to install, configure, operate and perform the necessary maintenance on
all equipment making up the AC 800M Controller.
The Control Builder M is used to configure and program the AC 800M controller,
and is referred to in this manual as Control Builder or CB.
For information on the controller software, see Related Documentation on page 17.
How to Use This Book
Section 1, Introduction
Provides an overview of the hardware platform AC 800M together with information
on related documents. Also provided is a list of product versions, conventions, and a
short glossary of related terms and acronyms.
Section 2, Installation
A guide to the various installation activities such as:
Planning the installation (including site selection)
• Building requirements
• Environmental considerations concerning hazardous locations
• Grounding requirements
• Mounting dimensions.
To Next Page
Loading...
Need help?
General
