3BSE 027 941 R301 43
Section 2 Installation
This section contains guidelines for planning the installation of an AC 800M
controller system (see Site Selection and Building Requirements on page 43).
A complete list of measures to be taken with respect to the environment and other
on-site conditions is not given here.
The equipment should be adapted to the actual application by means of a thorough
and correctly scoped system definition, ordering procedures and design
requirements. This section also describes practical on-site installation procedures
specific to AC 800M units (see Mounting AC 800M Units onto DIN-Rail on page
49).
Site Planning
Site Selection and Building Requirements
The AC 800M system is designed for use within demanding industrial
environments. This section provides information on standard requirements
regarding the location at which or the building(s) in which the AC 800M Controller
system is to be stored or installed.
Most applications require no special arrangements regarding the environment, and
so installation according to standard regulations will suffice. In certain situations
however, consideration must be given to specific protective measures.
To Next Page
General
