Appendix D Directive Considerations Electro-Magnetic Compatibility (EMC)
3BSE 027 941 R301 211
Appendix D Directive Considerations
Relevant products comply with EMC Directive 89/336/EEC and Low-Voltage
Directive 73/23/EEC. The products are provided with a CE marking.
Electro-Magnetic Compatibility (EMC)
Modules mentioned in this document, for which the product or packing is CE
marked, are tested and approved according to the following standards:
• EN 61131-2 Product Standard, Programmable Controller
- Industrial Environment
• EN 50081-2 EMC – Generic Emission Standard,
Part 2 – Industrial Environment
• EN 61000-6-2 EMC – Generic Immunity Standard,
Part 2 – Industrial Environment.
Low-Voltage Directive (LVD)
Modules mentioned in this manual, for which product or packing is CE marked,
comply with the LVD where applicable.
To fulfill the LVD for AC 800M and S800 I/O, the power supplies shall provide a
secondary safety extra low voltage (SELV) or a protected extra low voltage (PELV).
The power supplies described in this manual, SD821, SD822 and SD823, fulfill
these requirements, see Power Supply Units – Types SD821, SD822 and SD823 on
page 181.
If you use other power supplies, except SD821, SD822 or SD823, to provide the
24V d.c. for AC 800M we strongly recommend that they also are CE marked and
fulfill the LVD (SELV, PELV).
The AC 800M modules are IP20 semi-protected equipment and must be mounted
in non-public localities.
To Next Page
Loading...
Need help?
General
