ABB AC500-S User Manual

3.6 TU582-S Safety I/O Terminal Unit
Elements of the module
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
1
2
3
4
5
6
4
5
Fig. 59: Safety I/O Terminal Unit TU582-S (spring-type) for Safety I/O expansion modules
1 I/O-Bus (10 pole, male)
2 I/O-Bus (10 pole, female)
3 Slot for I/O module
4 With a screwdriver, inserted in this place, adjacent Terminal Units can be shoved from each other.
5 Holes for wall mounting
6 40 spring terminals (signals and process voltage)
3.6.1 Functionality
The I/O Terminal Units TU582-S (with spring-type terminals) is specifically designed for use with AC500-S
Safety I/O modules AI581-S, DI581-S and DX581-S.
The safety input/output modules (I/O expansion modules) plug into the I/O Terminal Unit. When properly
seated, they are secured with two mechanical locks. All the electrical connections are made through the Ter-
minal Unit, which allows removal and replacement of the I/O modules without disturbing the wiring at the Ter-
minal Unit.
AC500-S Safety Modules
TU582-S Safety I/O Terminal Unit > Functionality
30.03.2017AC500-S158

ABB AC500-S Specifications

General

Brand	ABB
Model	AC500-S
Category	Controller
Language	English