Rev. Description of version / changes Who Date
1.0.3 Various typos were corrected. Additional abbreviations were
included in the abbreviation list.
The entire document was re-styled:
n The yellow background on notices and recommendations was
replaced by a light-grey background because of document
standardization.
n "DANGER" and "NOTICE" symbols were replaced by standard
symbols from German Standard DIN 4844-2 in text boxes.
The text was changed in the document:
n More standard terms are now used in the document.
n Values for storage and transport temperatures were extended.
n Vertical mounting option (with derating) is added for SM560-S
Safety CPU and corrected for DI581-S and AI581-S Safety I/O
modules.
n LREAL is not supported by SM560-S Safety CPUs and was
removed from the document.
n POU SF_MAX_POWER_DIP_GET description was modified.
n "DANGER" text box was added for POU
SF_DPRAM_PM5XX_S_SEND to explain limitations for POU
usage.
n F_WD_Time2 and Device_WD2 term definitions in Chapter 5.3
were corrected.
n "F_Host_WD" was replaced with "the value set using
SF_WDOG_TIME_SET" inside of “NOTICE” box in Chapter 5.3
ABB 28.05.2015
1.0.4 Various typos were corrected. Minor improvements in the text.
Major changes:
Licensing information was updated:
n Ch. 4.1: Notice Block with reference to PS501-S license installa-
tion removed.
n Ch. 4.2: Figure 63 updated (Programming workflow, step 2) was
enhanced for the license handling of Automation Builder version
V2.0.2 (or higher).
n Ch. 4.3.2: “Licence activation” was extended with additional
licensing information for usage of Automation Builder version
V2.0.2 (or higher).
Additional information according to the new F-Host library “SAFETY-
BASE_PROFIsafe_AC500_V22_Ext.lib” was added:
n Ch 4.6.1: Table for library “SAFETYBASE_PROFI-
safe_AC500_V22_Ext.lib” was updated.
n Ch. 4.6.3: The chapter was updated and renamed acc. to the
new library name “SAFETYBASE_PROFI-
safe_AC500_V22_Ext.lib”.
n Ch. 6.2: Checklist item 20 was updated according to the new
library name “SAFETYBASE_PROFIsafe_AC500_V22_Ext.lib”.
ABB 27.03.2017
Introduction
Document history
30.03.2017 AC500-S 9
To Next Page
Loading...
Need help?
General
