￭ Keys
The keys of the control panel are described below.
Left softkey
The left softkey ( ) is usually used for exiting and canceling. Its function in a given situation
is shown by the softkey selection in the bottom left corner of the display.
Holding down exits each view in turn until you are back in the Home view. This function
does not work in special screens.
Right softkey
The right softkey ( ) is usually used for selecting, accepting and confirming. The function
of the right softkey in a given situation is shown by the softkey selection in the bottom right
corner of the display.
Arrow keys
The up and down arrow keys ( and ) are used to highlight selections in menus and
selection lists, to scroll up and down on text pages, and to adjust values when, for example,
setting the time, entering a passcode or changing a parameter value.
The left and right arrow keys ( and ) are used to move the cursor left and right in
parameter editing and to move forward and backward in assistants. In menus, and and
function the same way as and , respectively.
Help
The help key (
) opens a help page. The help page is context-sensitive, in other words,
the content of the page is relevant to the menu or view in question. See Help (page 29) for
more information on the help page.
Start and Stop
In local control, the start key ( ) and the stop key ( ) start and stop the drive, respectively.
Off
In Hand and Auto control, the Off key ( ) is used to stop the drive.
Hand
The Hand key ( ) is used to start the drive in local mode. When the drive is running, if
you switch to Auto mode, the drive changes the control location to Remote mode and the
drive may stop.
Control panel overview 21
To Next Page
Loading...
Need help?
General
