ABB ACS180-04S-03A7-1 User Manual

Maximum motor cable length, 4 kHzFrame
Class 3Class 2
Class 1
1)
ftmftmftm
131401314013140R3
983098309830R4
1)
Category C1 with conducted emissions only. Radiated emissions are not compatible when measured
with the standard emission measurement setup and must be measured on cabinet and machine
installations for each case.
Note:
• Radiated emissions are according to C2 with single phase ACS180-04S...-1
drives. For ACS180-04S...-4 drives, use a metal enclosure to fulfill radiated
emissions C2/C1 limits with an external EMC filter.
• External EMC filter must be used together with ACS180-04S-... drives.
• For ACS180-04N... drives, the maximum motor cable lengths are according to
the motor cable length table. The EMC category for these drives is C4.
• For ACS180-04S-...-2 drives, the EMC category is C4. In order to achieve higher
EMC category, must use external EMC filters.
Control connection data
0 … 10 V DC (10% overrange, 11 V DC max.)Voltage signal, single-
ended
Analog inputs (AI1,
AI2)
R
in
= 38 kohm
0 … 20 mA (10% overrange, 22 mA max.)Current signal, single-
ended
R
in
= 205 ohm
≤ 1.0%, of full scaleInaccuracy
10 V DC ±1%, max. load current 10 mAPotentiometer refer-
ence value
0 … 20 mA (10% overrange, 22 mA max.) into
maximum 500 ohm load
Current output modeAnalog output (AO)
0 … 10 V DC (10% overrange, 11 V DC max.)
into 200 kohm minimum load (resistive)
Voltage output mode
≤ 1.5%, of full scaleInaccuracy
+24 V DC ±10%, max. 100 mAAs outputAuxiliary voltage out-
put (+24V)
Technical data 133

ABB ACS180-04S-03A7-1 Specifications

General

Brand	ABB
Model	ACS180-04S-03A7-1
Category	DC Drives
Language	English