Control connections
￭
Standard variant (ACS180-04S-...)
Connections:
1. Safe torque-off connections
2. Relay output connection
3. Modbus termination jumper
4. Communication mode jumper
1)
5. Digital inputs and outputs
6. Analog inputs and outputs
7. EIA-485 Modbus RTU
8. Panel connector (external panel or adapter
for PC connection)
9. Cold configuration connection for CCA-01
(Frame sizes R2...R4 only).
1)
Some types only, refer to Communication mode jumper J2 (page 78).
Operation principle and hardware description 29
To Next Page
Loading...
Need help?
General
