DescriptionCode
EMC&STO.N/S
N=Basic variant (without STO; C4 EMC level);
S=Standard variant (integrated STO; C2(1~230V), C3(3~400V) or C4(3~230V) EMC
level).
Size. See the ratings table in the technical data.02A6
Voltage rating.4
• 1=1-phase 208 ... 240 V AC
• 2=3-phase 208 ... 240 V AC
• 4=3-phase 380 ... 480 V AC.
Control panel
The drive has an integrated control panel with a display and control keys.
For quick reference, there is an ACS180 User interface guide (3AXD50000606696
[multilingual]).
Refer to ACS180 Firmware manual (3AXD50000467860 [English]) for information
on how to use the interface, start-up the drive and modify settings and parameters.
Control panel
Contents
• Control panel
• Home view and Message view
• Options menu
• Main menu
• Submenus
Control panel
By default, ACS 180 has an integrated panel. If required, you can use external control
panels such as assistant control panel or a basic panel. For more information, refer
ACX-AP-x assistant control panel’s user’s manual (3AUA0000085685 [English]) or
ACS-BP-S basic control panel’s user’s manual (3AXD50000032527 [English])
1. Display - shows the Home view as default.
2. Main menu.
3. OK button - open the Main menu, select and save
settings.
4. Start button - start the drive.
5. Menu navigation buttons - move in the menus and
set values.
6. Stop button - stop the drive.
7. Back button - open the Options menu, and move
back in the menu.
8. Options menu.
9. Status light - green and red colors indicate the
state and potential problems.
1
2
3
4
5
6
7
d
e
e
c
a
b
Display (
Home
view):1
a) Control location: local or remote
b) Status icons
c) Reference target value
d) Actual measured value
e) Left and right softkey actions.
Back
key (opens the
Options
view in the
Home
view)2
OK
key (opens the
Menu
in the
Home
view)3
Operation principle and hardware description 33
To Next Page
Loading...
Need help?
General
