Installation
45
Before installation
Delivery check
The drive is delivered in a box that also contains:
• hardware manual
• appropriate firmware manuals and guides
• optional module manuals
• delivery documents.
Check that there are no signs of damage. Before attempting installation and
operation, check the information on the type designation label of the drive to verify
that the unit is of the correct type. The label includes an IEC and NEMA rating, UL,
C-UL, CSA and CE markings, a type code and a serial number, which allow
individual recognition of each unit. The first digit of the serial number refers to the
manufacturing plant. The next four digits refer to the unit’s manufacturing year and
week respectively. The remaining digits complete the serial number so that there are
no two units with the same serial number.
The type designation label is located under the front visor and the serial number
label inside the unit. Example labels are shown below.
Type designation label
Serial number label
To Next Page
Loading...
Need help?
General
