About this manual
20
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to ABB website and
selecting Drives – Sales, Support and Service net
work on the right pane.
Product training
For information on ABB product training, navigate to ABB website and select
Drives – Training courses on the right pane.
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to ABB website, then
select successively Drives – Document Library – Manuals feedback form on the right
pane.
Connect the power cables.
Connect the control and the auxiliary control cables.
Electrical installation, Motor control and I/O
board (RMIO), Resistor braking (optional) and
the optional module manual delivered with the
module.
Check the installation. Installation checklist
Commission the drive. Appropriate Firmware Manual
Commission the optional brake chopper (if present). Resistor braking
Operating of the drive: start, stop, speed control etc. Appropriate Firmware Manual
Task See
To Next Page
Need help?
General
