ABB PVS-100 User Manual

- 124 -
000843BG
7 - Operation
Frequency Control: P(f) (Only visible and editable with
Admin Plus privileges)
In the Frequency Control: P(f) sub-menu you can cong settings re-
lated to the active power derating as function of grid frequency.
Do not change these parameters if not requested by the grid operator.
Ramp Control (Only visible and editable with Admin Plus
privileges)
In the Ramp Control sub-menu you can cong the parameter related
to the active power ramp up at the start-up and after a grid fault event.
Do not change these parameters if not requested by the grid operator.
Reactive Power Control (Only visible and editable with
Admin Plus privileges)
In the Reactive Power Control sub-menu you can congure settings
related the reactive power parameters using the following parameters
groups:
1. Watt/Cosphi Settings: Cosphi(P)
2. Q Set
3. Cosphi Set
4. Volt/VAr Settings: Q(V)
Do not change these parameters if not requested by the grid operator.

ABB PVS-100 Specifications

General

Brand	ABB
Model	PVS-100
Category	Inverter
Language	English