ABB PVS-100 User Manual

- 60 -
000833BG
5 - Installation
• Lift the power module up to the
bracket and over the wiring box,
using the (optional) handles
04
or the (optional) M12 eyebolts, or
another appropriate lifting device.
Risk of injury due to
the heavy weight of
the equipment.
• Insert the heads of two rear at-
tachment pins
13
(placed on the
rear part of the power module)
into the slots on the bracket.
For horizontal mounting, the two
markings on the bracket in-
dicate the point where the edge
of the power module have to be
placed to allow the engagement
of the rear attachment pins
13
.
• (only for vertical mounting) Re-
move the previously installed
gasket protective covers (optio-
nal) from the inverter by slinding
it pulling from the handles.
PVS
13
PVS

ABB PVS-100 Specifications

General

Brand	ABB
Model	PVS-100
Category	Inverter
Language	English