- 59 -
000833BG
5 - Installation
Assembly the Inverter to the
bracket
• Lift the wiring box up to the bracket
using the (optional) handles
04
or the (optional) M12 eyebolts, or
another appropriate lifting device.
Risk of injury due to
the heavy weight of
the equipment.
• Insert the heads of the two rear
attachment pins
13
(placed on
the rear part of the wiring box)
into the two slots on the bra-
cket. Check that the pins
13
has been correctly inserted in
the slots as shown in the pic-
ture before releasing the wi-
ring box.
• Remove handle or eye bolts (if
used)
• (only for vertical mounting) Insert
the two gasket protective covers
(optional) sliding the positioning
pins (shown in red in the picture)
into the proper bracket holes.
If the mounting is correct the
gasket protective cover will have
a locked position.
PVS
13
PVS
To Next Page
Loading...
Need help?
General