ABB PVS-175-TL User Manual

Table of contents
1. Safety and accident prevention
6 1.1 Safety information and instructions
7 1.2 Symbols and signs
8 1.3 Installation and maintenance safety
8 1.3.1 General safety information
8 1.3.2 Environmental conditions and risks
9 1.3.3 Electrical and thermal safety
10 1.4 Residual risks
2. Introduction and general information
11 2.1 Warranty and supply conditions
11 2.1.1 Not included in the supply conditions
12 2.2 Scope and target audience
12 2.2.1 Purpose and document structure
12 2.2.2 List of appendix documents
12 2.2.3 Operator and maintenance personnel skills/
prerequisites
13 2.3 Application area, general conditions
13 2.3.1 Intended or allowed use
13 2.3.2 Limits in field of use
13 2.3.3 Improper or prohibited use
3. Characteristics
14 3.1 General conditions
15 3.2 Identification of equipment and manufacturer
15 3.2.1 Regulatory label
16 3.2.2 Inverter identification label
16 3.2.3 Communication Identification label
17 3.3 Models and range of equipment
18 3.4 Component reference numbers
22 3.5 Characteristics and technical data
22 3.5.1 Technical data
25 3.5.2 Tightening torques
26 3.5.3 Overall dimensions of the inverter
26 3.5.4 Overall dimensions of the mounting bracket
27 3.6 Efficiency curves
27 3.6.1 PVS-175-TL - Efficiency Vs Nominal Power
27 3.6.2 PVS-175-TL - Efficiency Vs MPP Voltage
28 3.7 Power derating
28 3.7.1 Power derating due to environmental
conditions
28 3.7.2 Power derating due to the input voltage
29 3.8 P-Q Capability
30 3.9 Characteristics of a photovoltaic generator
31 3.10 Description of the equipment
31 3.10.1 Operating diagram (example)
31 3.10.2 Mutual connection of multiple inverters
32 3.10.3 Notes on the system sizing
33 3.11 Functionality and components description
33 3.11.1 Highlights
33 3.11.2 Improved commissioning and maintenance
33 3.11.3 Aurora Vision Plant Management Platform
34 3.11.4 Configurable relays
34 3.11.5 Remote switch-on/switch-off
34 3.11.6 Reactive power feed into the grid
34 3.11.7 Limiting the active power fed into the grid
35 3.11.8 Overvoltage surge arrester monitoring (-SX/
SX2 models only)
35 3.11.9 Data transmission and control
35 3.12 Communication interfaces
35 3.12.1 Ethernet bus connection
36 3.13 Topographic diagram of the equipment
38 3.14 Safety devices
38 3.14.1 Anti-Islanding
38 3.14.2 Ground fault of the photovoltaic panels
38 3.14.3 Overvoltage surge arresters (-SX/SX2 models
only)
38 3.14.4 Other safeguards
4. Lifting and transport
39 4.1 Transport and handling
39 4.2 Equipment weight
39 4.3 Storage
40 4.4 Unpacking and checking
40 4.5 Lifting
43 4.6 List of supplied components
44 4.7 Kit of recommended spare parts
5. Installation
45 5.1 Installation safety instruction
46 5.2 Installation site and position
46 5.2.1 General recommendation on installation
position
46 5.2.2 Tilting admittance
46 5.2.3 Distances
48 5.2.4 Installation of multiple units
49 5.2.5 Wireless signal environmental checks
49 5.2.6 Installations above 2000 metres
49 5.2.7 Installations with a high level of humidity
50 5.3 Installations of IP65 protection covers for
wiring box openings
51 5.4 Mounting Instruction
51 5.4.1 Bracket assembly
53 5.4.2 Assembly the inverter to the bracket
56 5.4.3 Opening the Wiring box cover
57 5.4.4 Final fastening operations
59 5.4.5 Opening the Power module cover
60 5.4.6 Connection of the AC interface power cables
62 5.4.7 Connection of the interface signal connectors

ABB PVS-175-TL Specifications

General

Brand	ABB
Model	PVS-175-TL
Category	Inverter
Language	English