18 Introduction to the manual
Contents of the manual
Safety instructions – Safety instructions for the installation, commissioning, operation and
maintenance of the inverter.
Introduction to the manual – Introduction to the manual.
Operation principle and hardware description – The operation principle and construction of
the inverter in brief.
Planning the mechanical installation – Instructions on how to plan the mechanical
installation.
Planning the electrical installation – Instructions on how to plan the electrical installation,
select the cables, route the cables and protect the inverter.
Technical data – The technical data for the inverter.
Dimension drawings – The dimension drawings of the inverter and inverter foundation.
Control unit – Information on the control unit.
Related documents
Refer to the inner front cover.
Categorization by frame size and option code
Instructions, technical data, dimensions and weights which concern a certain inverter
frame sizes are marked with the frame size (n x R8i). To identify your unit, refer to Type
designation labels on page 27.
The instructions and technical data which concern optional components are marked with
option codes, for example, +K475. The options included in the inverter can be identified
from the type designation label. Refer to Type designation key on page 28.
To Next Page
Loading...
Need help?
General