13.1.3.2 All indication LEDs
Activating
the Reset of indication LEDs will zero all fifteen LEDs to the right of the LCD.
Main mnenu/Reset/Reset LEDs/All indication LEDs
In the dialog box that appears, choose YES to reset.
13.1.4 Reset lockout SMPPTRC (94)
Objects that are considered at risk after a trip may be prevented from reconnecting by a
lockout condition. The reset lockout facility is used to undo a lockout condition caused
by a such a trip.
Main menu/Reset/Reset lockout/TripLogic(PTRC,94)/TRP
In the dialog box that appears, choose YES to reset.
13.1.5 Reset process eventlist
Main menu/Reset/Reset process eventlist
Local HMI setting for resetting the process eventlist.
13.1.6 Reset temperature functions
The Reset temperature function under the Reset counters menu offers the following
reset possibilities. These are outlined below.
Main menu/Reset/Reset temperature/ThermalOverload1TimeConstant(PTTR,26)/
THL
In the dialog box that appears, choose YES to reset.
1MRK506276-UUS B Section 13
Reset
101
Operator's manual
To Next Page
Loading...
Need help?
General
