Displays available instances of the local/remote function LocalRemote,
LocRemControl that permit the user to set the control mode.
Reservation input RESIN
Main menu/Settings/General Settings/Control/Apparatus Control/
ReservationInput/RE
Displays available instances of the Reservation input function RESIN with one settable
parameter per function for future use.
Switch controller SCSWI
Main menu/Settings/General settings/Control/ApparatusControl/
SwitchController(CSWI)/CS
Displays instances of the switch controller function SCSWI with eight settable
parameters. These are settings for the control model, position dependency and various
threshold times.
9.2.5.2
Control commands
Automation bits, command function for DNP3.0 (AutomationBits)
Main menu/Settings/General settings/Control/Commands/Automation bits/ABI
A parameter to enable or disable the function is available.
Single command SINGLECMD
Main menu/Settings/General settings/Control/Commands/SingleCommand/CD
The mode for single command is set here.
Versatile switch VSGGIO
Main menu/Settings/General settings/Control/Commands/VersatileSwitch/VS
Parameters such as control model according to IEC61850 and operation mode for the
versatile switch is set here.
1MRK506276-UUS B Section 9
Read and change settings
49
Operator's manual
To Next Page
Loading...
Need help?
General
