Commissioning
System Manual
137
6.10 Change devices / Change physical address
The devices can be changed later at any time. This, for example, could be necessary when
when after the installation an indoor station "moves" to a different floor or house. This also
applies when a device is to be commissioned that has already been commissioned in a different
system.
For this, the physical address has be be reentered anew, see chapter 6.2 “Commissioning of a
system — Step 1: Local addressing “ on page 63.
With the input of a new physical address the device loses its certificate. The device must then
be re-integrated into the system.
To Next Page
Loading...
Need help?
General
