EasyManuals Logo

ABB Welcome IP User Manual

ABB Welcome IP
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #149 background imageLoading...
Page #149 background image
Case studies
System Manual
149
4. Prepare the home network.
For this, set up the LAN connections of the additional indoor stations (extension units) in
the "Local settings" / "Home network port".
LAN/WLAN version: Set it on "LAN".
LAN/LAN version: Set it on the 1st LAN connection "LAN1".
5. Switch the extension unit over to the static IP address and adjust the IP address.
In the additional indoor station change to the "System settings" / "Network settings"
function.
Set a fixed IP address and the sub-net mask in the "Network settings" function.
Disable the "Obtain IP address automatically" function.
IP address: 192.168.1.201
Each additional indoor station is counted upwards by one. E.g.to "192.168.1.202",
etc.
Sub-net mask: 255.255.255.0
Change to the "Smart Access Point".
6. Add the extension unit manually to the project in the "Smart Access Point".
By saving in step two of adding, the extension unit receives a certificate from the "Smart
Access Point".
Fig. 133: Indoor station: Certificate
Check on the additional indoor station (extension unit) whether it has received the
certificate.

Table of Contents

Other manuals for ABB Welcome IP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB Welcome IP and is the answer not in the manual?

ABB Welcome IP Specifications

General IconGeneral
BrandABB
ModelWelcome IP
CategoryIntercom System
LanguageEnglish

Related product manuals