AcerRouter 700 Series User Guide 3-15
If your switch type is Auto-detect (available in North America only), ente
r your Directory Phone Number 1 and Directory Phone Number 2.
If your switch type is NT DMS-100, ATT 5ESS (Multipoint), N1-1, ente
r SPID1 and SPID2 (provided by your phone company).
For all other switch types, no additional SPID information is required.
If your switch type is Permanent 64K or Permanent 128K, no additional
information is required.
Step 6 Select APPLY to apply the ISDN Port Configuration to the AcerRouter
700’s database, or select ADVANCED for more options and proceed to
the next section.
When you click the Advanced button on the previous screen, the following window
appears:
This selection tells the AcerRouter 700 if it requires to validate an incoming data call
by examining the ISDN sub-address associated with that call.
Step 7 Set the following parameters:
Ignore Sub-Address, if any: For an incoming data call if you want to ign
ore the called party sub-address.
Require Sub-Address for Data Calls: If you require and incoming data
call to contain the called party sub-address, party or extension number to
accept an incoming call.
Step 8 Click OK to save the apply the ISDN Port Configuration to the AcerRou
ter 700’s database and go back to the previous screen, or CANCEL to can
cel an change, and go back to the previous screen.
Creating a Profile for Remote Office Access
The next step is to set up a connection profile for the remote sitee, select Connection
Profiles from the menu:
Configuration - Connection Profiles
Step 1 When you select Connection Profiles, the Connection Profile Summary
screen appears only if you have existing Connection Profiles. For example
, if you configured an Internet connection as described earlier, it will appe
Incoming Sub-Address
Require Sub-Address for Data Calls
Port Configuration
ISDN
CANCEL OK
Options
Ignore Sub-Address, if any
To Next Page
Loading...
Need help?
General
