Acer 700 Series User Manual

6-10 AcerRouter 700 Series User Guide
Configuration - Advanced Features - IP
Step 2 Enter the following information:
Note: To install public servers on your network (e.g., Web or ftp servers), you
need to apply for an IP address for each server plus one for the LAN port of the
AcerRouter 700. All these public IP addresses have to belong to the same IP
network.
Public IP Address: the public IP address for the LAN interface on the
AcerRouter .
Public IP Netmask: the network mask for the public network address on
your LAN.
Private IP Address: the private IP address for the LAN interface on the
AcerRouter 700. The default private IP address is 192.168.168.230. If you
want to create your own private network through other AcerRouters with
remote offices, you need to make sure that each AcerRouter 700 on each
LAN is assigned a unique private IP network address.
However, please note that once you change the private IP address (such as
from the default of 192.168.168.230 to 192.168.167.230) either from the
APPLY
System IP Configuration
(Optional) Public IP Address
(Optional) Public IP netmask:
Primary DNS IP Address
Secondary DNS IP address
DHCP
IP RIP
Enable Disable
Private IP Address
Private IP Netmask
192 168 168 230
255 255 255 0
. . .
. . .
. . .
. . .
. . .
. . .
IP Routing Table
Active
LAN Interface
Public IP address Private IP address
Private
workstations on
Public computers
on your public
network
Modem Interface
(IP address usually assigned by ISP)
Internet
your private
network

Acer 700 Series Specifications

General

Brand	Acer
Model	700 Series
Category	Network Router
Language	English