Acer Altos G330 Series User Manual

5 System troubleshooting
86
Initial system startup problems
Problems that occur at initial system startup are usually caused by an
incorrect installation or configuration. Hardware failure is a less
possible cause. If the problem you are experiencing is with a specific
application, see the "There is problem with the software program"
item on page 92.

Acer Altos G330 Series Specifications

General

Brand	Acer
Model	Altos G330 Series
Category	Server
Language	English

Summary

Safety, Ergonomics, and Maintenance

General Safety and Handling Instructions

Essential precautions for safe operation, cleaning, and handling.

Electrical Safety and Usage Warnings

Ergonomic Tips for Computer Use

System Setup and Operation

Setting Up the System and Requirements

System Powering Procedures

Steps for turning the system on, off, and troubleshooting startup issues.

System Upgrades and Component Installation

Installation Precautions and Procedures

ESD precautions, pre- and post-installation steps for hardware.

Opening the Server and Removing Components

Storage Device Installation and Configuration

Procedures for installing and configuring drives.

Processor and Memory Upgrades

Steps for removing and installing the CPU and RAM modules.

Expansion Card and CMOS Battery Maintenance

Guidance on installing expansion cards and replacing the CMOS battery.

System BIOS Configuration

BIOS Setup Menus and Options

Core Component Configuration Settings

Configuring processor, memory, IDE, USB, PCI, and power settings.

Security, Server Management, and Boot Options

Error Handling, Exit, and Maintenance

Managing POST errors, exiting setup, clearing CMOS, and upgrading BIOS.

System Troubleshooting Guide

Pre-Troubleshooting and System Reset

Startup Issues and Troubleshooting Checklist

Hardware Diagnostics and Component Checks

Component-Specific Troubleshooting

Solutions for issues with power, drives, memory, network, and display.

POST Beep Codes Interpretation

Appendix B: SATA RAID Configuration

Onboard Intel and LSI SATA RAID Setup

Procedures for creating RAID 1 volumes using Intel and LSI controllers.

Appendix C: SAS RAID Configuration

SAS RAID Configuration Support

Creating the RAID 1 Volume