4 System BIOS
54
Entering BIOS setup
1 Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2 During POST, press F2.
If you fail to press F2 before POST is completed, you will need to
restart the server.
Note: If you are unable to access BIOS setup, you need to clear
the CMOS RAM. Go to page 80 for instructions.
BIOS setup interface
The BIOS setup menu interface is divided into the following:
• Menu bar – Displays the primary BIOS setup menus.
• Left frame – Displays the menu fields. Grayed-out fields are
display-only items. Blue fields are user-configurable. When a field
is selected, it is highlighted in white.
• Right frame – Displays the key legend (navigation keys). Above
the key legend is an area reserved for a text description of the
currently selected field.
BIOS setup navigation keys
The BIOS setup utility uses a key-based navigation system called hot
keys. Use the following keys to move around the Setup utility.
• Left and Right arrow keys – Move between menu selections.
• Tab or Up/Down arrow keys – Move the cursor to the field you
want.
• Enter key – Display a submenu screen.
Note: Primary menus marked by a (>) include submenu fields.
To Next Page
Loading...
Need help?
General
