4 System BIOS
68
There are two types of passwords that you can set.
• Admin password
Entering this password will allow the user to access and change all
settings in the Setup utility.
• User password
Entering this password will restrict a user’s access to the Setup
menus. To enable or disable this field, an admin password must
first be set. A user can only access and modify the System Time,
System Date, and User Password fields.
To set a system password:
1 Use the up/down keys to select a password parameter, then press
Enter.
A password box will appear.
2 Type a password then press Enter.
The password may consist of up to seven alphanumeric characters
(A-Z, a-z, 0-9).
To Next Page
Loading...
Need help?
General
